Discharge White is a bright white water-based discharge ink. It can be used as a highlight color. WB Ink can be printed on high mesh counts and produces very fine image detail. Our ink can be used with other inks to create multiple effects. Add discharge activator (3-5%) by weight depending on desired result and mix well. Once ink is activated it should be used within 8 hours.
Flash and Curing Guidelines
Flash forced air flash is optimal. For curing should be a minimum of 90 seconds at 320F. For the best results 2-3 minutes at 300-320F.
Helpful Hints for Optimal Use:
Mist the screen with water during high volume runs to prevent the ink from drying out
Recommended Clean Up:
Water Based Screen Cleaner
What is the proper cure temp for this ink?
Proper cure tempature is 320F.